Contact Us

Head Office: 5-10 Block B, NO 39, 158 Alley Huancheng West Road Southern Part Haishu District Ningbo China.
Fitting Factory Add: 329 National High Way Side, Zhangqi Town, Cixi, Ningbo, China.
Vaves Factory Add: Shamen Industrial Area, Yuhuan, Taizhou, Zhejiang, China.

Gi Kitchen Brass Ball Valve For Air Oil And Gas

Item No.: W-1066
Material: Brass Body, Brass Bonnet, Brass ball, Steel Handle, PTFE ball Seat, NBR O-Ring Brass can be CuZnPb3, CZ121, C37710, CW614N, CW617, DZR etc.
Surface: Nickel plated

echnical Parameter

Item No. W-1066
Product name ball valve for air

ball valve oil and gas

gi brass ball valve

brass gas valve

kitchen gas valve

Material Brass Body, Brass Bonnet, Brass ball, Steel Handle, PTFE ball Seat, NBR O-Ring

Brass can be CuZnPb3, CZ121, C37710, CW614N, CW617, DZR etc

Surface Nickel plated
Size 1/4″-4″
Sample Time 1) 5 days-For our existing samples for reference

2) 15 days-If new size OR need make the new mould

OEM Acceptable Yes
Production Capacity 100000 pcs each month
Packing Details Standard export packing or as customers requirements.

Inner box, outer carton and pallet

Inspection Each cargo will be inspected before shipping. The third-party inspection company is acceptable, like SGS, ASIA inspection etc.

Product Display

Product Display

Technical Features

Suitable for domestic water service, heating and

Air-conditioning plants, compressed air systems

Technical Features

Nominal Pressure: max. 40bar

Working Temperature: -20℃≤t≤100℃

Available: in all sizes from 1/2″ up to 2″

Technical Features 2

DN L (mm) H (mm) B (mm) D (mm)
15 82 50 13 95
20 77 53 19 120
25 90 60 25 120
32 106 71 32 120
40 121 93 38 150
50 137 103 50 150
NO. Component Material
1 Body Brass
2 Cap Brass
3 Ball Brass
4 Ball seats PTFE
5 Stem Brass
6 O-ring NBR
7 Handle Steel
8 Nut Steel

Product Features

Hot Tags: 600 wog brass ball valve, full port brass ball valve, brass gas valve, kitchen gas valve

1. Material meet the requirements of the national standards.

2. High sealing precision, 100% sealing test before shipment.

3. High-quality brass material and hot forging process can effectively prevent defects such as pores, shrinkage holes, pinholes, etc.

4. Each valve must be tested in accordance with national standards. Unqualified products will never be shipped.

5. Two years warranty, Any quality problem of the product itself, we will pay without conditions.

Production Process

Production Process

About Us

Ningbo Western fitting Co.,Ltd. are specialist for all kindsbrass OEM valves, pipe fittings, OEM fittings and pneumatic connectors, also produce all kinds of customized valves spare parts.

We got ISO 9001:2000, UL, UPC, TUV WRAS CE and CSA approvals for some valves and fittings. Our products could meet the American standard ANSI/ASME B16.22-2001, European Community’s standard EN1254-1, British standard BS864-2 and German standard DIN2856. Our main markets are North, South and Middle America countries, all European countries, Russia and nearby countries, middle-east, Africa countries for difference standard products.

We have two factories. one located in Yuhuan, mainly produce all kinds of brass valves, bibcocks, pipe fittings etc. another factory located in Ningbo Cixi, which produce all kinds of brass fittings, fasteners and pneumatic connector & pneumatic valves. We have 130 employees and our assets under management in excess of US $13,000,000 and covers an area of 15,000 square meters.

1. Wear-resistant; because 600 wog brass ball valve core of the hard-sealed ball valve is alloy steel spray welding,

Three-piece ball valve

Three-piece ball valve

The sealing ring is made of alloy steel surfacing, so the hard-sealed ball valve will not produce too much wear when it is switched on and off. (Its hardness factor is 65-70):

Second, the sealing performance is good; because the sealing of the hard-sealed ball valve is artificially ground, it cannot be used until the full port brass ball valve core and the sealing ring are completely matched. So his sealing performance is reliable.

Third, the switch is light; because the bottom of the sealing ring of the hard-sealed ball valve adopts a spring to hold the sealing ring and the  brass gas valve core tightly together, the switch is very light when the external force exceeds the preload of the spring.

4. Long service life:  kitchen gas valve has been widely used in petroleum, chemical industry, power generation, papermaking, atomic energy, aviation, rocket and other departments, as well as people’s daily life.

Brass valves & Fitting Production Process 2

Primary Competitive Advantages

1, Our company has several year’s experience in producing all kind of brass valve and fittings, we have the self-operated importing and exporting rights.

2, All products are approved by ISO9001, UL and CE approved.

3, We can produce the valve and fittings according to our customer’s requirement, and if the order is large, we don’t charge any mould fee.

4, We also welcome OEM orders.


Q. What is your payment term?

A: T/T 30% deposit payment, balance within 10 days of B/L date or L/C.

Q: What is your main market?

A: North America, South America, Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia.

Q: Can I get samples from your factory?

A: Yes, Samples can be provided.

Q: If products have some quality problem, how would you deal with?

A: We will responsible for all the quality problems.

Send Inquiry

request a quote