Angle valve,china Angle valve manufacturer,supplier,fastory,exporter,exporter,wholesale in china- Ningbo Western Valves Co., Ltd.

Angle valve-w60017
Description:Brass Ball Valve Angle Valve Polished chrome plated with Plastic handwheel light weight type >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60019
Description:Brass Ball Valve Angle Valve Polished chrome plated with plastic handwheel light weight type >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60020
Description:Brass Angle Valve Polished chrome plated with plastic crisscross handwheel >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60007
Description:Brass Angle Valve with Nut .Polished and chrome plated with decorate plate >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60001
Description:1/2 in. CF x 3/8 in. OD Comp. Angle 1/4-Turn Chrome Stop Potable PEX Plumbing Stops and Valve with Chrome plated polished ;with zinc alloy polished hand wheel Brass Angle Valve with FIP MIP Compression connector; USA type Angle Valve with Flare connector 3/8" 1/4" 1/2" 3/4" Straight Valve. Angle Valve Meet NSF61 Standard Low Lead; Plumbing Valve Heavy Duty Bar Stock Construction ;Stainless steel or Nylon Riser for complete leak-Free Connection Plumbing shut off Valves; Straight shut off Valves 1/4” Turn 2 way or 3 way shut off valves 1/2” FIP X 3/8” Flare Technical Requirement: Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges. Before connecting, body cap male thread should be coated with sealing glue. Handle turn or close freely. After assembling, test by water at pressure no less than 0.6MPA, no leakage. For Compression Connection 1. Clean and Remove all Burrs from the inside and outside of copper tubing. Be sure that the tube is round. 2. Place compression nuts over supply tube, Threads facing out. Place compression sleeve onto supply Tube. 3. Using Two wrenches (One on compression nuts and one on the Valve body) Tighten compression nuts onto stop Valve body. Do not use thread seal tape. Be sure that the copper tube is inserted all way into stop valve. Us cloth or tape to protect chrome finish on stop valve. Tighten securely. 4. Check for leaking For Female IPS Compression 1. Place thread seal over clean threads. 2. Screw stop valve onto pipe and tighten secure while threading the stop valve to avoid creating leaks behind walls. Us cloth or tape to protect chrome finish on stop Valve 3. Check for leaks. >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60002
Description:5/8 in. ODC x 3/8 in. OD Comp. Straight 1/4-Turn Chrome Stop Adapter;Angle bestop,Water supply Stops 1.Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically.When the medium is back-going, valve disc will automaticaly closed to avoid accidents. 2. Working Temp: 100 °C Working Pressure: PN10 or PN16 Suitable Media: Water,Steam,Oil ect. Not recommended for Steam 3. Bolted cover,Two-piece or three-piece Body,Full or Reduced bore, Blowout Proof Stem Fire safe and Anti static Dual seat with injection and darin& outlet ASTE A216WCB,A351 CF8,A351 CF8M, A351 CF3,A351 CEF3M,A351 CN7M Standards comploance 5/8 in. ODC x 3/8 in. OD Comp. Straight >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60021
Description:Brass Sprinkler for Garden Irrigation 1/2" Garden Green Sprinkler Brass Sprinkler body,Zinc alloy wing with spring autamatic garden irrigation system >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60018
Description:Brass Angle Valve Polished chrome plated with zinc alloy handwheel heavy weight type >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60016
Description:Brass Angle Valve Polished chrome plated with Plastic chrome plated handwheel >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60015
Description:Brass Angle Valve Polished chrome plated with zinc alloy handwheel light weight type 1/2" 145g >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60014
Description: Brass Angle Valve Polished chrome plated with zinc alloy handwheel light weight type >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60013
Description: Brass ball style angle valve without nuts polished chrome plated with stainer 1/2"x1/2" 3/4"x3/4" >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60012
Description:Polished chrome plated with zinc alloy handwheel light weight type >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60004
Description: 1/2 in. CS x 3/8 in. OD Comp. Angle 1/4-Turn Chrome Stop compress inlet/FIP inlet/Sweat Inlet/Retrofit CPVC Inlet Brass Angle Valve; Brass Plumbing Valve; Brass Genius Valve Brass Angle Valve with Chrome plated polished ;with zinc alloy polished hand wheel Brass Angle Valve with FIP MIP Compression connector; USA type Angle Valve with Flare connector 3/8" 1/4" 1/2" 3/4" Straight Valve. Angle Valve Meet NSF61 Standard Low Lead; Plumbing Valve Heavy Duty Bar Stock Construction ;Stainless steel or Nylon Riser for complete leak-Free Connection Plumbing shut off Valves; Straight shut off Valves 1/4” Turn 2 way or 3 way shut off valves 1/2” FIP X 3/8” Flare Technical Requirement: Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges. Before connecting, body cap male thread should be coated with sealing glue. Handle turn or close freely. After assembling, test by water at pressure no less than 0.6MPA, no leakage. For Compression Connection 1. Clean and Remove all Burrs from the inside and outside of copper tubing. Be sure that the tube is round. 2. Place compression nuts over supply tube, Threads facing out. Place compression sleeve onto supply Tube. 3. Using Two wrenches (One on compression nuts and one on the Valve body) Tighten compression nuts onto stop Valve body. Do not use thread seal tape. Be sure that the copper tube is inserted all way into stop valve. Us cloth or tape to protect chrome finish on stop valve. Tighten securely. 4. Check for leaking For Female IPS Compression 1. Place thread seal over clean threads. 2. Screw stop valve onto pipe and tighten secure while threading the stop valve to avoid creating leaks behind walls. Us cloth or tape to protect chrome finish on stop Valve 3. Check for leaks. >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60003
Description: 3/8 in. ODC x 3/8 in. OD Comp. Straight 1/4-Turn Chrome Stop Adapter;Angle Bastop; Water Supply stop Brass Angle Valve; Brass Plumbing Valve; Brass Genius Valve Brass Angle Valve with Chrome plated polished ;with zinc alloy polished hand wheel Brass Angle Valve with FIP MIP Compression connector; USA type Angle Valve with Flare connector 3/8" 1/4" 1/2" 3/4" Straight Valve. Angle Valve Meet NSF61 Standard Low Lead; Plumbing Valve Heavy Duty Bar Stock Construction ;Stainless steel or Nylon Riser for complete leak-Free Connection Plumbing shut off Valves; Straight shut off Valves 1/4” Turn 2 way or 3 way shut off valves 1/2” FIP X 3/8” Flare Technical Requirement: Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges. Before connecting, body cap male thread should be coated with sealing glue. Handle turn or close freely. After assembling, test by water at pressure no less than 0.6MPA, no leakage. For Compression Connection 1. Clean and Remove all Burrs from the inside and outside of copper tubing. Be sure that the tube is round. 2. Place compression nuts over supply tube, Threads facing out. Place compression sleeve onto supply Tube. 3. Using Two wrenches (One on compression nuts and one on the Valve body) Tighten compression nuts onto stop Valve body. Do not use thread seal tape. Be sure that the copper tube is inserted all way into stop valve. Us cloth or tape to protect chrome finish on stop valve. Tighten securely. 4. Check for leaking For Female IPS Compression 1. Place thread seal over clean threads. 2. Screw stop valve onto pipe and tighten secure while threading the stop valve to avoid creating leaks behind walls. Us cloth or tape to protect chrome finish on stop Valve 3. Check for leaks. 3/8 in. ODC x 3/8 in. OD Comp. Straight >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60011
Description:################ >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60010
Description:################ >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60009
Description: Brass Angle Valve with Chrome plated polished with zinc alloy polished handwheel Heavy-duty >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60008
Description: 1/2"x1/2" 1/2"x3/8" 1/2"x3/4" without nus with plastic handles 1.Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically.When the medium is back-going, valve disc will automaticaly closed to avoid accidents. 2. Working Temp: 100 °C Working Pressure: PN10 or PN16 Suitable Media: Water,Steam,Oil ect. Not recommended for Steam 3. Bolted cover,Two-piece or three-piece Body,Full or Reduced bore, Blowout Proof Stem Fire safe and Anti static Dual seat with injection and darin& outlet ASTE A216WCB,A351 CF8,A351 CF8M, A351 CF3,A351 CEF3M,A351 CN7M Standards comploance >>>
Last Updated: 2008-10-15 19:43:42
Contact Now

Angle valve-w60006
Description:7/8 in. CS x 3/8 in. OD Comp. Angle 1/4-Turn Chrome Stop compress inlet/FIP inlet/Sweat Inlet/Retrofit CPVC Inlet 1.Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically.When the medium is back-going, valve disc will automaticaly closed to avoid accidents. 2. Working Temp: 100 °C Working Pressure: PN10 or PN16 Suitable Media: Water,Steam,Oil ect. Not recommended for Steam 3. Bolted cover,Two-piece or three-piece Body,Full or Reduced bore, Blowout Proof Stem Fire safe and Anti static Dual seat with injection and darin& outlet ASTE A216WCB,A351 CF8,A351 CF8M, A351 CF3,A351 CEF3M,A351 CN7M Standards comploance 1.Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically.When the medium is back-going, valve disc will automaticaly closed to avoid accidents. 2. Working Temp: 100 °C Working Pressure: PN10 or PN16 Suitable Media: Water,Steam,Oil ect. Not recommended for Steam 3. Bolted cover,Two-piece or three-piece Body,Full or Reduced bore, Blowout Proof Stem Fire safe and Anti static Dual seat with injection and darin& outlet ASTE A216WCB,A351 CF8,A351 CF8M, A351 CF3,A351 CEF3M,A351 CN7M Standards comploance >>>
Last Updated: 2008-10-15 19:43:42
Contact Now